Wom145_vMS
Crédit photo: .Kartesian company
Wom145_vMS provides accurate bass response in compact vented enclosure and extended frequency response.
The suspension uses the .dynamiK technology to keep excursion control in any situation.
The motor structure, engineered with FEA, uses cooper ring for very low THD.
The cone is made with proprietary CGF material, 10 times more rigid than usual carbon fiber.
T&S parameters
Fs : 48Hz
SPL : 87dB /2,8V /1m
Re : 6.2Ω
Qms : 2.38
Qts : 0.356
Bl : 6.6N/A
VAS : 9.86L
Mms : 9.78g
Sd : 78.5cm²
Frequency responses
On IEC baffle
Pink noise
Distance: 1m
Signal input: 2,83V
Impedance measured in free air
Dash curves: 30° & 60°
Smoothing: 1/12 Octave
Curve below 100Hz is simulated in 10L vented enclosure
Fc = 50Hz
Mechanical drawing
Unit: [mm]
Proprietary CGF
Low lost - NBR surround
Innovative dynamiK spider
Ø26mm Cu wire
Aluminium former
High grade Fe magnet structure
Demodulated by cooper ring
11500 Gauss on 5mm height
Optimized and vented pole pieces
Injected aluminium, fully vented
Advanced design
Crédit photo: .Kartesian company
.png)
Advanced measurements
